
A: A threshold cover is used when there are height changes in the flooring. Consult with your flooring specialist about a more decorative transition that can be designed depending on your specific type of flooring.
Sealing your grout with a penetrating/impregnating grout sealer will help prevent moisture absorption that can cause stains. Sealing your grout will also make your regular cleanings easier. Grout sealer will need to be reapplied so check the manufacturer’s specific directions.
Yes, but be sure to select a tile that is unglazed, frost proof and has an absorption rate of less than 0.5 percent. Unglazed tiles offer greater resistance to slippage.
“COF” stands for “Coefficient of Friction”. COF is a test used to measure the friction or slippage of a tile espanolviagra.net. The measurements are important factors to consider when evaluating a tile’s slip resistance. However, other factors can also affect slip resistance such as…
I strongly recommend that you seal all of your natural stone to provide maximum stain protection. Select a high quality penetrating/impregnating sealer. These sealers will provide a natural, no-sheen look and are good for interior and exterior use.
Yes, but be sure to select a tile that is unglazed, frost proof and has an absorption rate of less than 0.5 percent. Unglazed tiles offer greater resistance to slippage.
Yes, you can use a semi or high gloss ceramic tile on your countertop but be aware that scratches will be more visible with a semi or high gloss finish.
Yes, porcelain tile is more expensive because it is a higher quality product. Porcelain is an extremely hard and non porous product. It has a water absorption rate of less than 0.5 percent making it very stain resistant.
Ceramic tile is a very durable flooring product when installed correctly. What will most likely happen is the item you drop, a plate or glass, will break while the tile may just suffer a chip or crack.
A through-body porcelain tile is best for outdoor applications. Porcelain is pressed under higher pressure and fired at higher temperatures than ceramic. This gives it an absorption rate of 0.5% or less, making porcelain suitable for interior and exterior applications in all climates. Ceramic…